Good Parts - The Parts That Fit

These are the parts I ended up using that fit. These parts worked for me.
Purchased From Part NumberPart DescriptionCostNotes
Jegs.comEdelbrock 3785 Performer 60° V6 Chevy Intake Manifold Base$244.95Bottom portion of 2 part intake manifold
Jegs.comEdelbrock 3789 Performer 4V 2.8L V6 Chevy Intake Manifold Top$136.95Top portion of 2 part intake manifold of 4 bbl carb.
Jegs.comHolley 0-8007 390 cfm Carburetor Electric Choke$511.95Carb.
Jegs.comHolley P/N 20-95 Transmission bracket kit.GM applications with a TH-700R4 transmission requires
Jegs.com375-MS91022INTAKE MANIFOLD GASKET $16.99
Jegs.com555-50360OIL CAP 1.25" CHRM W/JEG $6.99Nicer looking oil fill cap
Jegs.com555-15041FUEL FILTER 3/8 CLEAR$9.99
Jegs.com555-15495 SPACR PHEN 4150 OPEN 1/2"$17.99 My carb required a spacer so linkage would clear valve covers
Ace HardwareN/AVarious brass pipe connectorsMainly for fuel regulator connections.
Summitracing.com13301Aeromotive Universal Bypass Regulators$156.98Either a bypass reg. is required or you have to replace the fuel pump in the gas tank with a low pressure pump.
ClassicIndustries.com4569201MALLORY V6 2.8L & 3.1L DIST$421.99This one fits...well sort of. I had to have the drive gear collar machined down a little.
ClassicIndustries.com8203MSD BLASTER 2 IGN COIL SET$56.99You can sue your stock coil, mine was just old.